Metallic self-lubricating bear_COJINETE LISO DE CHANGSHENG ZHEJIANG, S.L.

Language

001

Portada > Cojinete autolubricante a base de metal

Cojinete autolubricante a base de metal

La matriz metálica del cojinete autolubricante a base de metal tiene una buena resistencia al desgaste, y el lubricante sólido contenido puede continuar lubricando la superficie de fricción, garantizando así el rendimiento autolubricante del cojinete. La combinación de materiales de esta estructura hace que el cojinete autolubricante a base de metal sea adecuado para diferentes condiciones de trabajo. De acuerdo con las diferentes disposiciones de los lubricantes sólidos, la lubricación de los cojinetes autolubricantes a base de metal se divide en dos tipos: uno es incorporar el lubricante sólido en la matriz metálica, y el otro es el lubricante sólido disperso que se distribuye uniformemente en la superficie de trabajo de la matriz metálica. El primero es aplicable al caso de alta y media carga en baja velocidad, y el segundo es adecuado para los usos en micro-movimiento y usos de alta y media velocidad que requieren factores de baja fricción.

Products Show

CSB650

The bronze alloy provides mechanical strength and loading capacity of the bearing and the solid lubricants provides continuous lubricating source to establish the reliable lubricating system. It is suitable for the application conditions of middle to high load and where the frequent restarting operation is needed. The typical applications include the plastic injection machine toggle, tie bar, port machinery, dam gate and mining machinery.

CSB650GT

The bronze alloy provides mechanical strength and loading capacity of the bearing and reduce the material cost. The solid lubricants provide continuous lubricating source to establish the reliable lubricating system. It is suitable for the application conditions of middle to high load and where the frequent restarting operation is needed.

CSB850S

The alloy layer is designed with proper porous alignment to ensure the evenly disperse of the solid lubricants. During the operation, a lubricating film can be easily established to provide lower friction coefficient. This material is suitable for the applications under high speed and with micro movement.

CSB850BM

The evenly dispersed solid lubricants reduce the static and dynamic friction coefficients difference. This material can work stably even under the micro movement condition. Depending on request, oil deposits or grooves could be designed on the bearing surface to hold oil or grease or any possible containments. It is suitable for the applications under middle to low load. Periodically lubricating is recommended for the duration improvement of the bearings.

CSB85HF

The Fe-Cu alloy backing provides mechanical strength of the bearings. The dispersed solid lubricants can establish lubricating film during the operation and the oil contained inside reduces the friction coefficient. It is recommended to use under the low load and middle to high speed conditions. CSB85HFH is a heat treated material which improves the impact resistance of the bearings and it is suitable for the using under middle to high load application conditions and under dust environment with impact load and marginal load.

Página anterior

Página siguiente

FIND US,

Want to get in touch?

COJINETE LISO DE CHANGSHENG ZHEJIANG, S.L.

Dirección: No.6, Xinda Road,Economic Development Zone, Jiashan, Zhejiang, China
Teléfono: +86-573-84184307
FAX: +86-573-84183450
Buzón: lynn@csb.com.cn

Nombre de la aplicación del mensaje:

底部留言

Descripción:

* Message contents：

Name：

E-mail：